Friday, November 22, 2013

Hercules DJ Control AIR+ Plus digital dj controller

Hercules DJ Control AIR+ Plus digital dj controller


Large jog wheels for a better DJing experience

Size similar to jog wheels on DJ CD players:
5.9"/15 cm diameter at the base
5.1"/13 cm diameter on top

Mechanical pressure detection for intuitive scratching

Over 750 steps per rotation: precise position scanning

Add fun to your mix with the AIR control
The contactless sensor lets you control the mix from above, without even touching the device, with 1 ft/30 cm of range
DJ CONTROL AIR+ converts the distance to your hand into a MIDI command
No need to touch the controller: you control the mix without any physical contact

Velocity pads to express your creativity
4 velocity pads on each deck let you liven up your mixes
Instantly trigger sample playback or hot cues with one touch
The harder the pads are tapped, the louder the volume of the samples played

Ergonomic design for enjoyable mixing sessions
Comfortable size: 17.7"/45 cm wide for plenty of space between controls while performing
Soft rubber cladding on rotary caps and transport buttons for easier handling:
All transport buttons incorporate a tact switch and soft rubber cladding
All rotary caps feature soft rubber cladding: fingers won’t slip

Versatile microphone input
High audio quality for balanced and unbalanced dynamic microphones
2 operating modes to integrate vocals into your mix:
Direct pass-through: speak over the music
Software processing: record your voice or add real-time effects to your voice

TECHNICAL SPECIFICATIONS

> 2-deck DJ controller with audio
> Great jog wheels for scratching
• Pressure detection: as intuitive for scratching as turntables
• Large diameter: 5.9"/15 cm
• > 750 steps per rotation
Built-in audio
• Master output
• Headphones output
• Microphone input
AIR sensor
• Long range sensor > 11.8"/30 cm
• View meter for AIR sensor
Mechanical specifications
Enclosure: 17.9 x 10.2" 45.5 x 26 cm
Jog wheels ΓΈ : 5.9"/15 cm
Weight : 4.4 lbs./2 kg
Audio specifications
Outputs:
Master 2 x RCA (line)
(ch. 1-2) 1 stereo ⅛" jack
Monitor 1 stereo ¼" jack
(ch. 3-4) (headphones)
1 stereo ⅛" jack
Input:
Mic In 1 x ¼" (balanced)

AIR control
Why is the controller called DJ CONTROL AIR+?
"AIR" stands for Adjustment by InfraRed: it is a contactless control.
The DJ places his or her hand flat over the infrared beam.
The controller calculates the distance between the sensor and the hand, and converts it into a gradual MIDI command.
This MIDI command modulates a setting in the DJ software.

Does the AIR control require specific lighting conditions?
No: the AIR control functions under any lighting conditions.
The infrared light beam projected toward the hand is invisible.
The sensor captures the infrared reflection on the hand, and uses the reflection to calculate the hand’s distance.
The reflection is the same in both daylight and low-light conditions, allowing the AIR control to be used during the day, at night or in places with weak lighting.

The AIR control functions with all flesh tones. The only incompatibility is the use of black gloves (as the infrared sensor would not be able to detect the reflection).

8 pads
2 sets of 4 pads control hot cues and samples.
The DJ taps on the pads with his or her fingertips to send commands such as cue points or samples.
The pads light up when touched.
In addition to a binary On/Off command, each pad can transfer velocity information to modulate the command.
For example: in sampler mode, the velocity can control the volume of a sample’s playback. The playback volume depends on how soft or how hard the DJ taps on the pad.

Pressure-detecting jog wheels
The jog wheels detect the pressure from the user’s hand.
With scratch mode enabled ("Vinyl" button to switch on/off), the jog wheels scratch when the hand’s weight is detected, and stop scratching when the hand’s weight is no longer detected. This allows the DJ to:
stop playback by pressing on the jog wheel.
restart playback by lifting up his or her hand.
scratch by turning the jog wheel while pressing down, and stop scratching by lifting up his or her hand.
bend the pitch (if playback is on) / browse within tracks (if playback is off) by turning the jog wheels using their outer ring, to avoid applying downward pressure.
With scratch mode disabled, the jog wheels bend the pitch or browse within tracks when turned, regardless of the pressure applied.

BOX CONTENTS

Hercules DJ CONTROL AIR+
USB cable
CD with DJUCED 40°(PC/Mac)
Printed + PDF installation guide

MINIMUM CONFIGURATION

Computer CPU: 1.6 GHz or faster Intel CoreTM 2 Duo or AMD 64-bit
2 GB of RAM or more
High-speed USB port (USB 2 or 3)
100 MB available disk space
CD/DVD-ROM drive
Internet access
Headphones + active speakers
Operating system (32/64-bit)
MS Windows® XP/Vista/7/8 or
Mac OS® 10.6/10.7/10.8

Thursday, November 14, 2013

KRK ROKIT 8 MONITORS STUDIO SPEAKERS – GENERATION 3

KRK ROKIT 8 MONITORS STUDIO SPEAKERS – GENERATION 3


KRK ROKIT MONITORS – GENERATION 3
KRK Systems is one of the world’s most respected manufacturers of studio reference monitors. In their state of the art design facility, KRK engineers create products that deliver natural and balanced spectral response with low distortion and superior imaging. KRK Studio Monitors have been the professional’s choice of recording engineers and artists for mixing and mastering hit records around the globe, as they need to hear every nuance of the audio being reproduced. KRK ROKIT Generation 3 monitors continue in this design philosophy, so regardless of your musical style, genre, or particular mixing needs, KRK Rokits deliver.

ROKIT 8 Powered Monitor - Generation 3
KRK's ROKIT 8 G3 (Generation 3) powered studio monitors offer professional performance and accuracy for recording, mixing, mastering and playback. The system consists of a 1” soft dome tweeter and 8” glass-Aramid composite woofer. It delivers high frequencies up to 35kHz, vocal clarity and extended bass response. The proprietary bi-amped, class A/B amplifier grants SPL up to 109dB. The ROKIT waveguide is designed to ensure detailed imaging in the listening position. The front-firing bass port reduces boundary coupling to allow flexible positioning in the room while the engineered surface reduces diffraction distortion. Multiple input connections ensure the ROKIT 8 G3 will easily integrate in any system configuration.

For large Recording rooms and high SPL Monitor needs, the KRK ROKIT 8 G3 will deliver any detail of performance thru its large headroom.

KRK ROKIT 8 G3 Features

Bi-amped, class A/B amplifier offering large headroom and low distortion
Proprietary waveguide optimized for superior imaging
1” Soft-dome tweeter provides pristine clarity and extended response up to 35kHz
High-frequency adjustment tailors the system to personal taste
Lightweight, glass-Aramid composite woofer delivers clear midrange and tight bass
Low-frequency adjustment tailors the monitors to taste and adjusts for room acoustics
Front Firing Port — Low-frequency extension while reducing boundary coupling
Radiused edges reduce distortion from diffraction
Low-resonance enclosure for minimized distortion and colorization
Multiple audio input connectors (XLR, ¼”, RCA) for universal connectivity in any studio environment
Factory installed foam pad provides isolation between the speaker and surface
Peak SPL : 109dB
Frequency Response 35Hz - 35kHz (+/- 2 dB)

KRK ROKIT 8 G3 Technical Specifications

Configuration:2-Way
System type:Active Studio Monitor
Low-Frequency:8" Aramid Glass Composite woofer
Mid-Frequency:N/A
High-Frequency:1" soft dome tweeter
Frequency Response:35Hz - 35kHz
Max Peak SPL:109 dB
Amplifier Class:Class A-B
Power Output:100W
High Frequency:25W
Mid-Frequency:N/A
Low Frequency:75W
Input Impedance (Ohms):10 K Ohm balanced
HF Level Adjust:-2dB, -1dB, 0, +1dB
System Volume:(-30dB - +6dB)
Indicators:Power
Input Connectors:
Unbalanced RCA
Balanced 1/4" TRS
Balanced XLR
Enclosure Construction:MDF
Finish:Black vinyl wrap
Port Configuration:Front firing slot port
Dimensions (D x W x H):12.4" (315mm) x 10.8" (275mm) x 15.6" (396mm)
Weight:24.6 Lbs. (11.2 Kg.)

KRK ROKIT 6 MONITORS STUDIO SPEAKERS – GENERATION 3

KRK ROKIT 6 MONITORS STUDIO SPEAKERS – GENERATION 3


KRK ROKIT MONITORS – GENERATION 3
KRK Systems is one of the world’s most respected manufacturers of studio reference monitors. In their state of the art design facility, KRK engineers create products that deliver natural and balanced spectral response with low distortion and superior imaging. KRK Studio Monitors have been the professional’s choice of recording engineers and artists for mixing and mastering hit records around the globe, as they need to hear every nuance of the audio being reproduced. KRK ROKIT Generation 3 monitors continue in this design philosophy, so regardless of your musical style, genre, or particular mixing needs, KRK Rokits deliver.

ROKIT 6 Powered Monitor - Generation 3
KRK's ROKIT 6 G3 (Generation 3) powered studio monitors offer professional performance and accuracy for recording, mixing, mastering and playback. The system consists of a 1” soft dome tweeter and 6” glass-Aramid composite woofer. It delivers high frequencies up to 35kHz, vocal clarity and extended bass response. The proprietary bi-amped, class A/B amplifier grants SPL up to 107dB. The ROKIT waveguide is designed to ensure detailed imaging in the listening position. The front-firing bass port reduces boundary coupling to allow flexible positioning in the room while the engineered surface reduces diffraction distortion. Multiple input connections ensure the ROKIT 6 G3 will easily integrate in any system configuration.

In larger rooms, where smaller monitors might not provide enough headroom, the ROKIT 6 G3 provides enough backup for even larger set ups.

KRK ROKIT 6 G3 Features

Bi-amped, class A/B amplifier offering large headroom and low distortion
Proprietary waveguide optimized for superior imaging
1” Soft-dome tweeter provides pristine clarity and extended response up to 35kHz
High-frequency adjustment tailors the system to personal taste
Lightweight, glass-Aramid composite woofer delivers clear midrange and tight bass
Low-frequency adjustment tailors the monitors to taste and adjusts for room acoustics
Front Firing Port — Low-frequency extension while reducing boundary coupling
Radiused edges reduce distortion from diffraction
Low-resonance enclosure for minimized distortion and colorization
Multiple audio input connectors (XLR, ¼”, RCA) for universal connectivity in any studio environment
Factory installed foam pad provides isolation between the speaker and surface
Peak SPL : 107dB
Frequency Response 38Hz - 35kHz (+/- 1.5 dB)

KRK ROKIT 6 G3 Technical Specifications

Configuration:2-Way
System type:Active Studio Monitor
Low-Frequency:6" Aramid Glass Composite woofer
Mid-Frequency:N/A
High-Frequency:1" soft dome tweeter
Frequency Response:38Hz - 35kHz
Max Peak SPL:107 dB
Amplifier Class:Class A-B
Power Output:73W
High Frequency:25W
Mid-Frequency:N/A
Low Frequency:48W
Input Impedance (Ohms):10 K Ohm balanced
HF Level Adjust:-2dB, -1dB, 0, +1dB
System Volume:(-30dB - +6dB)
Indicators:Power
Input Connectors:
Unbalanced RCA
Balanced 1/4" TRS
Balanced XLR
Enclosure Construction:MDF
Finish:Black vinyl wrap
Port Configuration:Front firing slot port
Dimensions (D x W x H):11.4" (290mm) x 8.9" (226mm) x 13.1" (332mm)
Weight:18.5 Lbs. (8.4 Kg.)

KRK ROKIT 5 MONITORS STUDIO SPEAKERS – GENERATION 3

KRK ROKIT 5 MONITORS STUDIO SPEAKERS – GENERATION 3


KRK ROKIT MONITORS – GENERATION 3
KRK Systems is one of the world’s most respected manufacturers of studio reference monitors. In their state of the art design facility, KRK engineers create products that deliver natural and balanced spectral response with low distortion and superior imaging. KRK Studio Monitors have been the professional’s choice of recording engineers and artists for mixing and mastering hit records around the globe, as they need to hear every nuance of the audio being reproduced. KRK ROKIT Generation 3 monitors continue in this design philosophy, so regardless of your musical style, genre, or particular mixing needs, KRK Rokits deliver.

ROKIT 5 Powered Monitor - Generation 3
KRK's ROKIT 5 G3 (Generation 3) powered studio monitors offer professional performance and accuracy for recording, mixing, mastering and playback. The system consists of a 1” soft dome tweeter and 5” glass-Aramid composite woofer. It delivers high frequencies up to 35kHz, vocal clarity and extended bass response. The proprietary bi-amped, class A/B amplifier grants SPL up to 106dB. The ROKIT waveguide is designed to ensure detailed imaging in the listening position. The front-firing bass port reduces boundary coupling to allow flexible positioning in the room while the engineered surface reduces diffraction distortion. Multiple input connections ensure the ROKIT 5 G3 will easily integrate in any system configuration.

As one of the most used Studio monitors in the world, the ROKIT 5 is a high valuable and compact solution towards an accurate mix.

KRK ROKIT 5 G3 Features

Bi-amped, class A/B amplifier offering large headroom and low distortion
Proprietary waveguide optimized for superior imaging
1” Soft-dome tweeter provides pristine clarity and extended response up to 35kHz
High-frequency adjustment tailors the system to personal taste
Lightweight, glass-Aramid composite woofer delivers clear midrange and tight bass
Low-frequency adjustment tailors the monitors to taste and adjusts for room acoustics
Front Firing Port — Low-frequency extension while reducing boundary coupling
Radiused edges reduce distortion from diffraction
Low-resonance enclosure for minimized distortion and colorization
Multiple audio input connectors (XLR, ¼”, RCA) for universal connectivity in any studio environment
Factory installed foam pad provides isolation between the speaker and surface
Peak SPL : 106dB
Frequency Response 45Hz - 35kHz (+/- 2 dB)

KRK ROKIT 5 G3 Technical Specifications

Configuration:2-Way
System type:Active Studio Monitor
Low-Frequency:5" Aramid Glass Composite woofer
Mid-Frequency:N/A
High-Frequency:1" soft dome tweeter
Frequency Response:45Hz - 35kHz
Max Peak SPL:106 dB
Amplifier Class:Class A-B
Power Output:50W
High Frequency:20W
Mid-Frequency:N/A
Low Frequency:30W
Input Impedance (Ohms):10 K Ohm balanced
HF Level Adjust:-2dB, -1dB, 0, +1dB
System Volume:(-30dB - +6dB)
Indicators:Power
Input Connectors:
Unbalanced RCA
Balanced 1/4" TRS
Balanced XLR
Enclosure Construction:MDF
Finish:Black vinyl wrap
Port Configuration:Front firing slot port
Dimensions (D x W x H):9.7" (246mm) x 7.4" (188mm) x 11.2" (284mm)
Weight:13 Lbs. (5.9 Kg.)

Tuesday, November 12, 2013

Griffin Folding DJ Laptop Stand with Sub-Tray

Griffin Folding DJ Laptop Stand with Sub-Tray


Here we have a folding DJ laptop stand with a tray by Thorn Holder LS series. In just a few seconds, this disc jockey laptop stand folds completely flat for ultimate portability with its featured spring lock pin! This sturdy and stable DJ laptop stand is ideal for disc jockeys but also can be used for personal use as well. The main tray easily accommodates all laptops measuring up to 18 inches wide and 14 inches deep, and the DJ laptop mount’s subtray holds small equipment up to 12 inches wide and 5.75 inches deep while the height can be adjusted from 4.5 inches to 8.75 inches. Both trays feature rubber padding to help prevent your laptops from sliding out of place. This ultra versatile DJ rackmount laptop stand can easily accommodate a total weight load of 22 pounds, and a free carrying bag is included with every DJ rackmount laptop stand. Complete with an all-black finish, this strong disc jockey laptop computer mount is perfect for your next event.

We encourage you to compare this DJ laptop holder to others online. These disc jockey laptop computer stands are stable and durable. If you shop around, you will realize we offer the lowest price for DJ laptop holders. Try finding another folding DJ laptop stand with tray able to work this hard for you at such a cheap price; it cannot be done! We offer the lowest price for disc jockey laptop computer mounts. Buy today with peace of mind knowing you are getting the very lowest price possible for this quality folding DJ laptop stand with a tray.

Folding DJ Laptop Stand with Tray Features

Ideal for DJs, musicians, home and office use
Fits all laptop sizes ideal up to 18 inches wide and 14 inches deep
Sub tray fits equipment up to 12 inches wide and 5.75 inches deep
Black finish
Strong, sturdy, durable steel structure
Anti-sliding protection system
Spring lock pin for opening and folding quickly
Sub tray for small equipment
Folds flat for easy transportation
Carrying bag included
1 year/12 month warranty
Folding DJ Laptop Stand with Tray Specifications

Height: from ground to top mounting arms 11.75 inches
Sub tray adjustable height from ground: 4.5 inches to 8.75 inches
Width of top mounting arms: 8.25 inches
Width of sub tray mounting arms: 5 inches
Width of bottom base legs: 10 inches
Depth of top mount arms: 9.5 inches
Depth of sub tray mounting arms: 5.75 inches
Depth of bottom base legs: 10.25 inches
Weight load: 22 pounds
Gross weight: 3.4 pounds

American Audio Versaport - 4x4 Soundcard with Mic, Headphone, Level -- work with Virtual DJ n more

American Audio Versaport - 4x4 Soundcard with Mic, Headphone, Level -- work with Virtual DJ n more


Turn your music from analog to digital with ease!

The Versaport is a great way to convert any analog signal into digital files. This easy-to-use audio interface connects directly to your PC by its USB connection. Record audio with your computers built-in audio recorder or your favorite audio production software (see recommendations below). (RCA cables not included)

Specifications
• 16-bit/48 kHz AD/DA converter
• USB 1.1 compliant
• Mic level knob
• Monitor level knob
• Line/ phono selector
• Headphone & Mic jack
• 4 channel - 4 input & 4 output
• RCA analog connections
• USB bus - powered, adapter-free
• Dimensions (LxWxH): 130” x 120” x 40” / 4.72” x 5.1”x 1.57”
• Weight: 0.33 lbs. / 0.15 kgs

Import audio using these programs (plus others):
• Windows: MME, MS DirectSound, Steinberg ASIO & Audition
• Macintosh: Garage Band, Audio Hijack Pro(OSX) & Sound Manager (OS9)

System Requirements:
Windows
• OS: Microsoft Windows 98/ 98se/ME/ 2000/ XP
• Computer: Windows compatible computer with a USB connector
• CPU/ Clock: pentinum II processor 233 MHz or higher (win98/ SE/ ME)
• Pentinum II processor 400MHz or higher (win2000)
• Memory(RAM): 64 MB or more
• Hard Disk: 120 MB or more
• Display: 800x600 or higher/ 65,536 colors (16 bit High Color) or more

Macintosh
• MacOS9.2 or later, Mac OSX.
• Computer: Apple Macintosh Series with on-board USB
• CPU/ Clock: PowerPC G3/300 MHz or higher
• Memory(RAM): 96MB or more (Application memory 32 MB or more)
• Hard Disk: 120 MB or more
• Display/ Colors: 800x600 or higher

Please note:If using American Audio's Versaport on two or more separate machines with different operating systems, you may need to install the Versaport Asio driver. This will allow you to switch from one operating system to the next.

ESI GIGAPORT HD+ Digital DJ Audio Interface [ former ESI Maya 44usb ] for Virtual DJ/Dekadance ...and more Timecode control

ESI GIGAPORT HD+ Digital DJ Audio Interface [ former ESI Maya 44usb ] for Virtual DJ/Dekadance ...and more Timecode control


GIGAPORT HD+ is not like any other USB audio interface ... it's simply the multichannel playback solution with the best price value ratio on the market due to its unique set of features providing 8 independent outputs (and full 7.1 surround sound support), 2 independent stereo headphone outputs and excellent audio quality supporting up to 24-bit and 96 kHz.

GIGAPORT HD+ provides ASIO 2.0 drivers for professional audio mixing and playback under Windows XP and Windows Vista / 7 (both 32-bit and 64-bit). The hardware is also CoreAudio compatible and nativly works under Mac OS X even without the installation of a special driver.

This makes GIGAPORT HD+ perfect for digital DJs on the road working with notebook computers. Simply use your favorite DJ software and GIGAPORT HD+'s eight outputs as up to 4 different stereo channels, enabling you to mix, cue and add effects! Monitor and pre-listen to your signals via the two built-in headphone outputs. GIGAPORT HD+ of course also works on your desktop computer and is compatible with all important professional audio software applications like Cubase, Sonar or Logic. The hardware also works with consumer programs such as DVD playback software. To get started right away, GIGAPORT HD+ comes bundled with a license of the DJ software Deckadance LE from Image-Line Software.

Features
24-bit / 96kHz D/A converter
8 independent output channels with RCA connectors
different playback modes: 44.1kHz with 16-bit and 8 channels, 44.1kHz with 24-bit and 6 channels, 48kHz with 24-bit and 6 channels, 96kHz with 24-bit and 2 channels
2 independent stereo headphone outputs: 1st output sends out mixed signal of all playback channels, 2nd output sends out different signal from playback channel 1/2 - perfect for monitoring and to pre-listen to signals
compatible with Windows XP and Windows Vista/7/8 supporting ASIO 2.0, WDM, MME (using ESI's EWDM driver technology)
compatible with Mac OS X and supported by the native CoreAudio USB audio support from Apple, no special driver installation required
compact and portable design with around 12 cm x 7 cm x 2 cm
includes license of Deckadance LE from Image-Line Software

Monday, November 11, 2013

NEW: Pioneer DDJ-WeGO2 Digital DJ Controller goes iOS 2013 [ Available now ]

NEW: Pioneer DDJ-WeGO2 Digital DJ Controller goes iOS 2013 [ Available now ]


Just one year ago, Pioneer surprised the DJ world with a daring design departure in the decidedly wedge-shaped DDJ-WeGO. And now coming up to the BPM Show 2013, they’ve done a bit of a remix, shifted focus, and bring you the Pioneer DDJ-WeGO2, a refreshed controller aimed at embracing iOS with an eye on laptop DJs too.

First the always detailed PR, followed by some opinion:

Supported Software Information

DDJ-WeGO2 users can download djay LE free of charge from Algorridim’s website
djay2/vjay (full version) can be purchased at the App Store
Virtual DJ LE software is included in the DDJ-WeGO2 box
Traktor pro2, Serato DJ, Virtual DJ Pro and djay for iPhone/iPad can be purchased from the App Store

KEY FEATURES OF THE DDJ-WeGO2

Intuitive, hands-on control of a variety of DJ software for iPhone/iPod touch/iPad or PC/Mac

The DDJ-WeGO2 puts the fun into learning to mix, liberating DJs from the trackpad to give a more realistic experience. Dedicated buttons and dials give DJs intuitive control of scratching, and triggering samples, effects and loops.

DJs simply use the Lightning to USB cable provided to connect the DDJ-WeGO2 to an iPhone/iPod touch/iPad running Algoriddim’s djay 2 app, and use its ergonomic controls to mix and mash up tracks straight from iTunes. Or they can connect to a PC/Mac and use the included Virtual DJ Limited Edition software, or another software package of their choice.

NEW! Grip doubles as an iPhone/iPod touch/iPad stand for even better portability and ease of use

The light and compact DDJ-WeGO2 now has a grip to make transporting the console and setting it up even easier. Plus the grip can also be used as a sturdy iphone/iPod touch/iPad stand, putting the screen in constant view during a set.

Pulse Control lights add a visual element to learning to mix

Inherited from Pioneer’s popular Digital DJ-ERGO (DDJ-ERGO) controller, the Pulse Control lights add an exciting visual element to DJing.

Mix Pulse: lights around the jog wheel show the beat of tracks in play. The lights lose intensely as the beats go out of sync, giving novices a visual aid to beat matching.

Launch Pulse: a red light travels from the Load button to the jog wheel when a track has loaded successfully so DJs know when a track is ready to play.

FX Pulse: LED light patterns ­around the jog wheel show which effects and filters are engaged.

Three colour options and customisable LEDs for a personalised controller

The DDJ-WeGO2 is available in black, white or red so there’s a console to suit every personality. And the jog wheel LEDs can be customised, with nine stunning colour options to choose from.

Multiple power options for ultimate flexibility to play out

The DDJ-WeGO2 is compatible with USB battery packs for DJing outside or when out of reach of the mains. As well as mains power, the DDJ-WeGO2 can also be powered via a USB connection to a PC/Mac.

Other features

Built-in sound card
High quality sound design for clear sound reproduction

MAIN SPECIFICATIONS

Bundled software Virtual DJ Limited Edition
Input ports MIC X 1 (1/4 inch jack)
Output ports Master OUT x 1 (RCA)
Headphone monitor OUT x 2 (1/4 inch phone, mini jack)
Other ports USB B port x 1
Frequency response 20 Hz ~ 20 kHz
Total harmonic distortion Max. 0.006%
S/N ratio 101 dB
External dimensions (without stand)(W x D x H) 380 mm x 208.5 mm x 65 mm
Weight(without stand) 1.6 kg
Accessories included iPhone/iPod touch/iPad connection cable (Lightning), USB cable, stand for iPhone//iPod touch/iPad

VIRTUAL DJ LIMITED EDITION SYSTEM REQUIREMENTS

Supported OS (Windows) Windows 8/7/Vista/XP (SP3)Intel® Pentium® 4 or AMD Athlon™ XP512MB RAM or more
Supported OS (Mac) Mac OS X v10.8/10.7/10.6/10.5Intel® processor platform1024MB RAM or more
Required disk space 50MB free space or more
Display resolution 1024 x 768 or more
Additional system requirements when mixing video ATI™ or NVIDIA® video chipsetWith dedicated 256MB of DDR3 RAM video memory

iOS DEVICES COMPATIBLE WITH THE DIGITAL DJ-WeGO2

iOS iOS 6.0
Devices supporting included cable (Lightning) iPad 4th generation, iPad mini, iPhone 5, iPod touch 5th generation

* VirtualDJ is a registered trademark of Atomix Productions, Inc.
* Windows®, Windows 8, Windows 7, Windows Vista® and Windows XP are registered trademarks or trademarks of Microsoft Corporation in the US and other countries
* Intel® is a registered trademark of Intel Corporation in the US and other countries
* iPhone, iPad, Mac OS are registered trademarks of Apple Inc. in the US and other countries
* iOS is a trademark containing Cisco trademark signs in the US and other countries
* Other stated company names, product names, technology names, etc. are the trademarks or registered trademarks of their respective companies.

Crane Stand Plus and CV3 pro dj Laptop Stand series

Crane Stand Plus and CV3 pro dj Laptop Stand series


The Crane Stand Plus is fully adjustable, lightweight, and portable and can be used with many different DJ devices such as controllers, MIDI devices, laptops and projectors.

FEATURES

Nylon Carry Bag
Height Adjustable from 4" to 13"
Folds Flat and Easy to Setup
Aluminium Knob and Lever Set
Powder Coated Steel Frame
Extremely versatile