Thursday, September 29, 2011

Numark N4 4-DECK DIGITAL DJ CONTROLLER AND MIXER [ Coming Soon Dec 2011 / Jan 2012 ]



Numark N4 4-DECK DIGITAL DJ CONTROLLER AND MIXER [ Coming Soon Dec 2011 / Jan 2012 ]

Four Decks of Control. Are you ready?

Featuring four decks of software control plus a built-in mixer that can be used with or without a computer, N4 is designed for DJs who want powerful capability in a lightweight, portable package. N4 is a complete DJ controller that has everything you need to perform at your highest level: large, touch-sensitive platters, four decks of software control with loop and effects controls, a built-in USB audio interface and a comprehensive mixer section with EQ and gain controls. N4 comes with both Serato DJ Intro software and a 4-deck version of Virtual DJ LE.

Built-In Mixer
N4 is built for flexible control of virtually any music source. You can use its built-in mixer to bring external sources into your mix including turntables, CD players and MP3 players: choose in an instant to switch from controlling 4 decks of software to controlling 2 decks of software plus 2 channels of external source.

Timecode Capability
With the ability to use time code, N4 sets a new standard for 4-channel controllers in its class. In addition to its four decks of MIDI software control, you get the ability to use CD players or turntables to control your advanced DJ software by employing turntables with time-coded vinyl or CD players with time-coded CDs.* Turn N4 into a four-platter controller by adding on two controllers or two turntables like the NDX900 Controller or two TTXUSB turntable.

Essential Elements
Of course, N4 comes equipped with an intuitive layout of faders, knobs and buttons that feel great, provide the right amount of resistance and are built to withstand abuse. Each deck is outfitted with standard DJ tools including a pitch fader with key-lock control, looping controls, and effect and sampling controls. Four Video Fade selectors are also on-board to give you video mixing capability when using Virtual DJ.**

Built-in USB Audio Interface
N4 is Class Compliant: plug it in to your laptop, load the software and you're ready to go. N4 enables USB recording of all your analog and digital sources. Whether you're using four decks or software or combining software and externals sources from N4's mixer section, your entire performance can be recorded, saved and posted to your website or social media. For your live audience, N4 has balanced XLR outputs, giving you a solid, professional connection to virtually any sound system.

Start taking control with N4 from Numark.

*Upgrade to Virtual DJ Pro software is required to use N4 with time-coded vinyl or CDs. **Upgrade to Virtual DJ Pro software is required to output full-screen video.


4-Deck controller and DJ Mixer that works with or without the computer
External mixing (2 CD/Turntable + 2 Mic)
Built-in professional USB audio interface with balanced XLR outputs
Large touch-sensitive control wheels
Serato DJ Intro software included
4-Deck version of Virtual DJ LE Included
Mixer section with EQ, loop and effects controls

Eastpak Vs Ed Banger Records Pak'r Padded backpack [ Super Limited Edition ]






Eastpak Vs Ed Banger Records Pak'r Padded backpack [ Super Limited Edition ]

COLOUR CHOICE - BLACK / GREY
Eastpak continue in cutting edge collaborations, this time with French Record label Ed Banger Records... home to the likes of Justice,Uffie, DJ Mehdi, Mr Oizo among others.

Featuring an all over print by creative director So_Me (who has collaborated with the likes of Kanye West)

The Original Backpack, a design classic. Perfect for everyday use the Padded Pak'r is simple, unfussy and imitated by many.Large main compartment, Zippered front pocket to stash small stuff, Comfortable padded back, Thick padded shoulder straps.

又一則關於Ed Banger Records的新資訊,這次是與EASTPAK合作推出的Padded Pak’r Backpack系列,整體設計交由Ed Banger代表圖像設計師So-Me操刀,以印滿圖騰展現出一貫的Ed Banger Style。此聯名包款將推出四種不同配色,每個背包都帶有不同的限量編號,想必到時又將造成一股搶購熱潮,喜愛的朋友手腳可要快了。

Wednesday, September 28, 2011

Siege Audio The Eleven Pro DJ Headphones



Siege Audio The Eleven Pro DJ Headphones

Colour: Black and White

DJ headphones
Over-ear stereo performance headphones.
Ten is so yesterday. The eleven is one louder and a thousand times better.

With modular cord design, 57mm Siege precision tuned drivers and rotating/swivel ear cups, the Siege Audio the eleven headphones can throw down with any professional DJ set you toss it in the pit with. Crank these bad boys up and blow your mind as well as your expectations.
Frequency Range: 16-20000Hz
Impedance (Ohm): 32
Sensitivity (dB/mW): 110
Driver Type: Full spectrum sound tuned drive
Driver Unit: 57mm
Cord Type: Siege Audio exclusive flat/round woven sheathing
Closed/Open Back: Closed
Plug Type: Slim and short resistant 3.5mm gold plated
Cord Length: 1.5m + modular design
Folding Design: Collapsible for easy travel
Colour: Black
Accessories: Siege icon stickers, microfiber transit sleeve
Detachable Cord: Yes
Unique Features: Siege Audio exclusive flat/round woven cord & iCompatible jack

iCon iStage MIDI Controller



iCon iStage MIDI Controller

Colour: White and Black

MIDI controller
Velocity-sensitive USB MIDI matrix & drum pad controller in black
The Icon iStage controller is a compact pad controller with 48 velocity-sensitive trigger pads, which are matrix control buttons as well. These have dual colour LED illumination granting a clear and easily operable surface.

The Icon iStage controller has 17 assignable buttons with red LEDs. Icon iStage provides 4 modes for different applications, which can be selected with separate buttons. The DJ mode has 12 x 4 matrix control buttons and play & stop buttons, the effector mode features 12 x 4 buttons for controlling effect parameters, the DAW mode allows you to control volume, solo, mute and pan on 8 channels. It features 16 buttons for MMC and functions and the drummer mode provides 3 sets with 16 drum pads each.
Power: USB bus power
Interface: USB/MIDI interface
Controls: 3 sets of 4x4 matrix control buttons with dual color LED backlight, 1 x encoder for jog wheel for fast scrolling and other controls, 1 x assignable fader
Diemensions: 325mm W x 99mm D x 20mm H
Weight: 890g
System requirements (PC): Windows XP/Vista (32bit)/Windows 7 (32 & 64bit)
System requirements (Mac): Class-compliant with Mac OS X

iCon USB MIDI DJ controller with OptiSen optical scratch wheels



iCon USB MIDI DJ controller with OptiSen optical scratch wheels

Colour: White and Black

DJ controller
USB MIDI DJ controller with OptiSen optical scratch wheels
The iCon iDJ USB MIDI controller offers a format that all digital DJs will feel instantly at home with in an ultra compact package which you can take anywhere.

All you need to start mixing is a laptop and some inspiration. The high resolution optic and touch sensitive sensors in this iCon iDJ controller's scratch wheels give a great analogue feel and are sensitivity adjustable.

Vital mixer controls are all there including crossfader, channel EQ and vertical faders for volume and tempo. Essential transport controls are on backlit buttons and there are even a further 8 assignable backlit buttons, so you can tailor the iCon iDJ controller to the way you work.
Controls: 8 x reassignable backlit buttons, 4 x extra assignable knobs for effect control, 8 x extra assignable backlit buttons, 2 x 3-band EQ control knobs
Power: USB bus powered
Connection: USB connector
Midi: iMap MIDI mapping software included for reassigning MIDI mapping
Weight: 810g
Dimensions: 325mm W x 99mm D x 20mm H
System Requirements PC: Class-compliant with Windows XP/Vista (32bit)
System Requirements Mac: Class-compliant with Mac OS X

Alesis Monitor ONE MK II speaker


Alesis Monitor ONE MK II speaker

It didn’t take long to realize we had a hit on our hands. Just a few short months after its introduction, Alesis Monitor One Studio Reference Monitor was a winner of the prestigious TEC Award, and on its way to becoming one of the most popular near field speakers on the market.

The reason was as clear as its own crisp flawless sound, super-flat wide frequency range, clear imaging, high-power handling and excellent bass transient response. These features add up to a unique ability to create incredibly accurate mixes that translate perfectly to every playback system.

Monitor One became an instant favorite among professional engineers and studio owners, as well as earning it a place in countless home studios.

Obviously, there was only one thing left to do. Make it even better.

Better design, for improved performance.

With such a successful platform to build on, Alesis’ engineers wisely settled for incremental improvements designed to coax even better performance from our monitors.

They started with a new 6.5” polypropylene low-frequency driver for tighter, more accurate bass response. Then matched it with a newly redesigned, 1” pure silk-dome, high-frequency transducer for even smoother, more accurate detail and response, and a broader sound stage.

They improved the overall frequency response (changing from 45 Hz – 18 kHz, to 45 Hz – 20 kHz +/- 3 dB) and coupled it with more efficient power handling. They also provided magnetic shielding to allow use in close proximity to video and computer monitors.

Surface improvements that go more than skin deep.

Perfectionists that they are, however, our engineers didn’t just settle for tinkering under the hood. The cabinet was redesigned for a new and more attractive professional finish, and are now mirror image; left/right pair for symmetrical speaker placement.

But more than just cosmetic improvements, the new Monitor One also features radiused edges for reduced edge diffraction, along with improved porting – thanks to the next–generation of our exclusive SuperPort venting technology – to eliminate the “choking” effect of smaller, shorter ports. The result is a low-frequency response which extends well below comparable near field monitors.

It all adds up to a spectacular next-generation of a popular standard - the new state-of-the-art in affordable, high-quality studio monitors.

Critical reference monitoring for recording and mixing
Excellent bass transient response
Flat frequency response for accurate mixes that translate to other playback systems
High power handling, high output

Enclosure Type
Superport vented

Powered/Unpowered
Unpowered

Frequency Response (Hz-kHz)
45 Hz-18 kHz

Sensitivity (dB)
88 dB

Crossover Frequency (kHz)
2.5 kHz

Woofer Size/Type
6.5" polypropylene cone

Tweeter Size/Type
1" silk dome

Magnetic Shielding
Yes

Cabinet Dimensions (HxWxD in inches)
15x8.5x10

Weight (lbs.)
15

Alesis M1 Active MK II speaker


Alesis M1 Active MK II speaker

By combining our expertise in reference monitor design with our proven track record in studio amplification, Alesis' new M1 Active™ Biamplified Reference Monitor offers the incredibly accurate response that perfectly translates to every playback system. Its internal active crossover and custom-designed dual amplifiers ensure an extremely consistent performance under a variety of different studio conditions and program material. The result is a broad, extremely flat frequency response, clear imaging with a wide sweet spot, high power handling and detailed high- and mid-frequency response that only a professional powered monitor can deliver.

Custom Drivers Designed For Active Monitoring

The M1 Active's woofer and tweeter were specifically designed for the most linear, low distortion response in powered monitoring applications. Its 6.5" woofer cone is formulated from non-woven carbon fiber. It's a material that has been used for the skins of combat aircraft wings, since it offers high tensile strength and low weight. In fact, carbon fiber is 25% lighter than polypropylene (the most common driver material) and hence provides quicker transient response in the low frequency range for superb bass response as well as a vast improvement in the detail of critical upper-mid frequencies. The M1 Active's 1" tweeter dome is made of pure silk, which offers a natural response that aids in preventing ear fatigue during long mix sessions. It also features an internal pole piece mounted phasing plug and is ferrofluid cooled to maintain the best balance of transient response to power handling.

Active Bi-Amplifiers and Electronic Crossovers

Two audiophile-quality amplifiers-a 75 watt woofer amp and a 25 watt tweeter amp-were developed for the M1 Active, along with 4th order high- and low-pass electronic crossover filters. The crossover point was carefully chosen at a low 2 kHz, and produces an extremely wide dispersion zone as well as low midrange coloration. Also, the special time alignment circuitry that's been added to the tweeter section of this crossover allows the output of frequencies from the high and low drivers to occur in perfect synchronization, avoiding the time smear that's typical in less advanced powered speakers.

Attractive Cabinet Design with Dual Ports and Offset Tweeter

In developing the M1 Active, the Alesis engineering team discovered that dual font-facing ports provided the fastest, most coherent and extended low frequency augmentation. Also, the unique offset design of the high frequency driver allows for the flattest frequency and power response in a speaker that offers such wide dispersion. The M1 Active's attractive mirror-imaged, charcoal- toned cabinet and magnetically-shielded drivers allow for placement in close proximity with computer or video monitors, and offers the added benefit of blending beautifully into your studio's decor without being obtrusive. They may be mounted in either a horizontal or vertical placement to best fit your studio's requirements.

The Alesis M1 Active™

With the lineage of our TEC Award-winning Monitor Onet Studio Reference Monitor, Alesis speakers have already become a standard in project and professional studios around the world. If you're looking for the same great accuracy and detailed response in a powered system that's truly affordable, the answer is clear: the new M1 Active from Alesis.

Enclosure Type
Ported

Powered/Unpowered
c

Frequency Response (Hz-kHz)
45 Hz-22 kHz

Crossover Frequency (kHz)
2 kHz

Woofer Size/Type
6.5" non-woven carbon filter

Tweeter Size/Type
1" silk dome

Magnetic Shielding
Yes

Cabinet Dimensions (HxWxD in inches)
8.5x15x9.25

Weight (lbs.)
21

Alesis M1 Active 620 speaker


Alesis M1 Active 620 speaker

The M1 Active 620 is the third generation of the acclaimed Alesis M1 Active Series. The M1 Active 620 offers incredible bass and midrange definition and flat frequency response from its high–precision driver and professionally–crafted crossover.

With a bold new look, redesigned driver, bass density control and EQ, this affordable, high–precision active reference monitor delivers superb sonic clarity.

6.5" low frequency woofer for clear bass and midrange
1" silk dome tweeter for smooth, detailed highs without harshness
Bi-amplified design / tweeter –30W, woofer –65W for ultra accurate frequency separation
High-precision drivers offer lower distortion and smoother frequency response
Acoustical waveguide for superior imaging with minimal diffraction
1" thick front baffle virtually eliminates speaker resonance
Magnetically shielded for close placement to video monitors in computer-based music production studios
XLR and 1/4" TRS input connectors with volume control
Low frequency density switch for acoustic space adjustment of the monitors
Rear port design provides deep bass extension and increased SPL
Hi, mid and low frequency EQ switches to accommodate user preference and sub-woofers
Top mounted, integrated power switch/clip light bar

Bi-amplified Design / Tweeter – 30W, woofer – 65W
Woofer. 6 1/4” lightweight, magnetically-shielded, ultra-stiff polypropylene cone with rubber surround and high power handling voice coil.
Tweeter. 1” silk dome with magnetic shielding
Frequency Response. 49 Hz – 20 kHz
Crossover Frequency. 2.8 kHz.
Signal-to-Noise Ratio. >100 dB below full output, unweighted.
Inputs. XLR and 1/4” supporting
both balanced and unbalanced cabling.
Polarity. Positive signal on “+” pin creates forward cone displacement.
Input Impedance. 20k ohms balanced or 10k ohms unbalanced.
Input Sensitivity. 85 mV noise (pink) produces 90 dB(A) output SPL at 1 meter. Gain knob turned fully clockwise (maximum).
Dimensions (W x H x D). 8.5” x 15.0” x 10.25” / 21.6 cm x 38.0 cm x 26.0cm.
Net Weight (each speaker). 21 lbs / 9.6 kg.

Alesis M1 Active 520 USB speaker


Alesis M1 Active 520 USB speaker

Linear audio reproduction and USB studio interface

M1Active 520 USB is a studio monitoring system designed for professional studio use with an internal digital-audio interface. M1Active 520 USB is a pair of active, bi-amplified, two-way reference monitors that play from 20,000 Hz all the way down to 56 Hz to cover nearly all frequencies audible to human ears. You can take USB digital signal out of your computer via USB and input it to M1Active 520 USB for low-noise, low-distortion performance. Priced attractively for any studio's budget, M1Active 520 USB perform with linearity, clarity, and neutrality typically reserved for monitors that cost much more.

REFERENCE MONITORING
We built M1Active 520USB around our popular five-inch polypropylene low-frequency driver for full, smooth response in the low end and our one-inch silk dome high-frequency driver for absolute clarity in the highs. Our custom crossover avoids the crucial vocal midrange, ensuring that your mixes sound the way you recorded them.

The low-resonance bass reflex cabinet features radiussed edges to reduce edge diffraction and a tuned port for bass extension. A bass boost switch offers low-frequency enhancement to further accommodate for room conditions requiring a little more output in the low end.

PROFESSIONAL MONITORING OPTIONS
When you reach for the convenient front panel volume control, you can be confident that the power you need will be there with M1Active 520 USB's bi-amplified design delivering 30W per speaker. Like the rest of the M1Active series, M1Active 520 USB are magnetically shielded, so there's never an issue of placement near computer screen, LCDs, or hard drives.

The front-panel stereo 1/4" headphone output mutes the loudspeakers when connected. When you connect headphones, the main volume control automatically switches to controlling the headphone output.

M1Active 520 USB feature a large, front-panel, bi-color indicator that indicates presence of signal in blue and clipping in red for instant feedback on system status.

EXTENSIVE I/O
Professional quality analog input jacks are located on the rear. Two balanced-1/4" inputs enable engineers to connect a stereo source or two mono sources. For convenient recordings, simply connect the stereo output of a mixer. You can create complete recordings with no additional audio interface!

The speakers are interconnected using a standard XLR cable for secure, professional connection. For worldwide operation, M1Active 520 USB features a voltage-switchable power supply.

USB DIGITAL AUDIO INTERFACE
In addition to their capabilities as traditional monitor loudspeakers, M1Active 520 USB monitors contain a USB audio interface. Connected audio sources such as mic preamps and instruments can be recorded directly into your computer at 16-bit, 44.1 or 48 kHz. Simply plug the USB cable into your computer. No special drivers required. And when it's time to listen back to your mixes, that same USB cable sends 16-bit, 44.1 or 48 kHz, stereo audio from computer to your M1Active 520 USBs. No more complicated interfaces and messy cable tangles.

Two-way, active, bi-amplified pair of reference studio-monitor loudspeakers
Wide, 56 – 20,000 Hz frequency response
60W system with 30W per speaker
Works with iPad via Apple USB Adaptor (sold separately).
Five-inch lightweight polypropylene woofer
One-inch silk-dome tweeter
Integrated USB audio interface with 16-bit, 44.1/48 kHz recording and playback
Two balanced-1/4" inputs
Stereo, 1/4" headphone output
Magnetically shielded for placement near TV and computer monitors
Low-resonance cabinet with tuned bass port
Bi-color signal/clip indicator
Switchable power supply ensures worldwide operation

Includes
Two M1Active 520 USB loudspeakers
XLR interconnection cable (6 ft)
USB cable (6 ft)
IEC power cable
Quick star manual
Safety and warranty guide

Low-frequency driver: 5” lightweight, magnetically-shielded, ultra-stiff polypropylene cone with rubber surround and high power handling voice coil
High-frequency driver: one-inch silk dome with magnetic shielding
Frequency Response: 56 - 20,000 Hz
Power: 30 W per channel RMS
Signal-to-Noise Ratio: >90dB weighted
Digital Conversion: 16-bit delta sigma, 44.1kHz or 48kHz sampling rate
Inputs: two balanced-1/4”
Polarity: Positive signal on “+” pin creates forward cone displacement
Input Impedance: 10k ohms
Input Level: -10dBV nominal, balanced
Dynamic Range: >80dB
Dimensions: (WxDxH) 7.25" x 8.875” x 10.625”

Alesis M1 Active 520 speaker


Alesis M1 Active 520 speaker

The M1 Active 520 is the third generation of the acclaimed Alesis M1 Active Series. The M1 Active 520 offers incredible bass and midrange definition and flat frequency response from its high-precision driver and professionally crafted crossover.

With a bold new look, redesigned driver, bass density control and EQ, this affordable, high-precision active reference monitor delivers superb sonic clarity.

5" low frequency woofer for clear bass and midrange
3/4" silk dome tweeter for smooth, detailed highs without harshness
Bi-amplified design / tweeter – 25W, woofer – 50W for ultra accurate frequency separation
High-precision drivers offer lower distortion and smoother frequency response
Acoustical waveguide for superior imaging with minimal diffraction
1" thick front baffle virtually eliminates speaker resonance
Magnetically shielded for close placement to video monitors in computer-based music production studios
XLR and 1/4" TRS input connectors with volume control
Low frequency density switch for acoustic space adjustment of the monitors
Rear port design provides deep bass extension and increased SPL
Hi, mid and low frequency EQ switches to accommodate user preference and sub-woofers
Top mounted, integrated power switch/clip light bar

Bi-amplified Design / Tweeter – 25W, woofer – 50W
Woofer. 5” lightweight, magnetically-shielded, ultra-stiff polypropylene cone with rubber surround and high power handling voice coil.
Tweeter. 3/4” silk dome with magnetic shielding.
Frequency Response. 56 Hz - 20 kHz
Crossover Frequency. 2.8 kHz
Signal-to-Noise Ratio. >100 dB below full output, unweighted.
Inputs. XLR and 1/4” supporting both balanced and unbalanced cabling.
Polarity. Positive signal on “+” pin creates forward cone displacement.
Input Impedance. 20k ohms balanced or 10k ohms unbalanced.
Input Sensitivity. 85 mV noise (pink) produces 90 dB(A) output SPL at 1 meter. Gain knob turned fully clockwise (maximum).
Dimensions (W x H x D). 6.5” x 10.5” x 7.75” / 16.5 cm x 26.7 cm x 19.7 cm
Net Weight (each speaker). 13.0 lbs / 6.0 kg.

Alesis M1 Active 320USB speaker



Alesis M1 Active 320USB speaker

Alesis delivers pro-grade USB speaker performance to the computer desktop. M1 Active 320 USB speakers enable you to play audio from your computer and record audio coming into the speaker to your computer. Simply plug in the USB cable to your computer – No special drivers required.

M1 Active 320USB speakers are not only substantial audio monitors, but also serve as a convenient audio interface. Keyboards, mic pre’s, guitar effects, DJ Mixers, or standard CD and tape players can all easily connect directly to the M1Active 320 USB. Record them directly into your computer.

Full range, superb sound quality insures that you get more accurate audio reproduction to check your mixes. A Bass Boost switch helps emphasize bass frequencies - Great for various room situations where you want to hear more bass emphasis.

USB 1.1 audio interface
16-Bit / 44.1-48 kHz recording and playback
Pro-grade 1/4" plugs and standard RCA jacks
Works with iPad via Apple USB Adaptor (sold separately)
TRS Headphone output
Two ¼” phone jacks inputs
Stereo 1/8” TRS mini-jack input
Stereo RCA inputs
1/8” TS output to passive speaker

Switchable power supply
Magnetically shielded for placement near TV and computer monitors

Woofer:
3” lightweight, magnetically-shielded
Tweeter:
1” silk dome
Frequency Response:
80 Hz - 20 kHz
Power:
10W per channel RMS
Signal-to-Noise Ratio:
88dB weighted
Digital Conversion:
16 bit delta sigma, 44.1kHz or 48kHz sampling rate
Speaker Dimensions (ea):
5" x 6.5" x 7.375" (W x D x H)

Pioneer DDJ-ERGO 2 channel Digital DJ Controller [ Exclusive First Look ] December 2011/January 2012








Pioneer DDJ-ERGO 2 channel Digital DJ Controller [ Exclusive First Look ] December 2011/January 2012

Pioneer has signalled its intention to take on the rest of the digital DJing market hard this Christmas by teasing a brand new two-channel controller, as this new video reveals.

The controller was first leaked by Pioneer Japan this week via their Twitter account, and as can be seen clearly in the video, is a direct shot across the bows of the Traktor Kontrol S2.

The platters (let’s forget about that logo for a second, I’m really not sure about the aesthetics there!) have the Pioneer LED rotating lights within them (as in the company’s own DDJ-T1 and DDJ-S1 controllers).

The design borrows elements from the Numark NS6 and the stylish Vestax units, especially that company’s Typhoon/Spin, and now-aging VCI-300. It also appears to be somewhat Apple-esque.

It remains to be seen how good the build quality of the unit will be – if it were as good as the aforementioned VCI-300, for instance, it at first glance would make an attractive pro compact unit, but if it were in to-budget plastic, it would appear to be more aimed at straight consumers.

So what software will it run? One line of speculation is that the big manufacturers will want to break away from Native Instruments and launch products with their own software, and it wouldn’t be the greatest leap for Pioneer to re-engineer its existing Rekordbox library software into standalone digital software for controllers. It’ll probably be Traktor, though.

Really though, we have no insider details other than what you can see in that video. Maybe we’ll find out more at BPM this month.

Zomo HD-1200 professional stereo dj headphones






Zomo HD-1200 professional stereo dj headphones

Colour: GOLD / BLACK / WHITE / ORANGE

The Zomo HD-1200 professional stereo headphones have a very cool design and are made of the finest materials. The closed-cup design ensures the DJ is not disturbed by ambient noise thereby achieving a clear, true monitor sound. With their solid yet light design, the Zomo HD-1200 headphones offer a comfortable monitoring experience, even during the longest performances. For easy and compact transportation the ear cups are both rotatable and retractable. This also allows an one ear monitoring. This high end headphones are offering a clear, brilliant, fat high pressure sound with optimized kick-bass frequency response only few other headphones can compare with. These makes the Zomo HD-1200 the perfect headphones for Live performances, monitoring or studio use. Also the convenient spiral cable with its one-side exit makes it so comfortable to wear this headphones that you might forget you still wearing them after a while. Additionally cable and plug can be chainged in just a few seconds. Also the highend materials and drivers are a garantie for a long livetime of these extraordinary professional sound experience. The Zomo HD-1200 is an outstanding headphone, introducing a new age of sound quality. A flowing balance of technic and design with professional sound. Your ears will thank you!

Sheer genius and totally cool! It´s ZOMO!

Features:

• Professional stereo headphones
• Excellent sound reproduction
• Input power: 3,5 Watt
• Lightweight for Long Term Wear: 265 Gramm
• High sound pressure level up to 110 dB
• Great quality
• With transport bag
• Transport bag, a set of arificial leather- und velour cups are included
• Colours: black, white, gold, orange

Technical Data:

• Cable: one-side exit spiral cable, 3 m
• Frequency response: 3-30000 Hz
• Sensitivity: 110 dB

Tuesday, September 27, 2011

Pioneer Digital DJ Controllers DDJ-T1 and DDJ-S1 carry bag pak DJC-SC1 [ NEW 2011 ]






Pioneer Digital DJ Controllers DDJ-T1 and DDJ-S1 carry bag pak DJC-SC1 [ NEW 2011 ]

Custom Soft Bag for the DDJ-S1 and DDJ-T1 Controllers
Pioneer Branded Bag and Zipper Pulls
Soft Cushion Interior to Protect Controller
Outside Storage pockets for cables, headphones, and accessories

The Pioneer DJC-SC1 Soft bag provides protection for the DDJ-S1 or the DDJ-T1 Controller and it also has a separate laptop pocket. Can carry it by handles, shoulder strap, or with the comfortable backpack straps.

Custom Soft Case for the DDJ-S1 and DDJ-T1 Controllers
Pioneer DJ branded bag and zipper pulls
Easy zipper access for up to 17" laptop
Soft cushion interior to protect controller
Outside storage pockets for cables, headphones, and travel accessories
4 different carrying styles include 2 handles, shoulder strap, and comfortable backpack straps
Key lock zippers equipped on controller and laptop pockets for security purposes
Rubber feet on bottom of bag for durability and allows bag to stand on end

Alesis iO Dock Pro Audio Dock For iPad & iPad 2



Alesis iO Dock Pro Audio Dock For iPad & iPad 2

Connect all of your audio gear to the entire world of apps for iPad.

The iO Dock (patent pending) is the first device that enables anyone with an iPad or iPad 2 to create, produce, and perform music with virtually any pro audio gear or instruments. The iO Dock is a universal docking station specifically designed for the iPad and iPad 2, and it gives musicians, recording engineers, and music producers the connectivity they need to create and perform with iPad. Connect all your pro audio gear to virtually any app in the App Store with the iO Dock.

FLEXIBLE FUNCTIONALITY
Songwriters, music producers and performers of all kinds will find that the iO Dock connects the iPad’s powerful processor, touch-screen interface and extensive library of apps to their collection of microphones, instruments, professional speaker and PA systems, MIDI controllers, sound modules, video projectors and much more.

With the iO Dock and an iPad, musicians and producers can record, perform, craft and create music in virtually any situation or location. Built to accommodate all current app-development standards including Core MIDI, the iO Dock is a universal device that bridges your choice of music-creation apps, instruments, and devices.

COMPLETE CONNECTIVITY
The iO Dock provides microphone and instrument users with two combination XLR and 1/4-inch inputs, each with its own gain control and switchable phantom power for condenser microphones. Guitarists and bassists will appreciate the iO Dock’s guitar-direct switch, enabling them to play, perform and record right into amplifier- and effects-modeling apps. Bands can connect outputs from their mixer and easily record their performances and rehearsals or use the iO Dock as a metronome or loop-playback device. Producers can use the iO Dock’s MIDI jacks to sequence external keyboards, samplers, drum machines and synthesizers, or perform using the iO Dock as the sound module and their favorite MIDI-compliant keyboard, drum pad or other controller. An assignable 1/4-inch footswitch input enables remote control of any app-defined function such as stop/start or record. Users can also connect the iO Dock to their Mac or PC using the USB port to send MIDI back and forth for creative, new applications of the iPad and computer used in tandem.

Users can connect the iO Dock’s stereo pair of 1/4-inch main outputs to studio monitors for critical listening, or to PA systems for use in performance settings. They can monitor on headphones, and independently control the levels of the two outputs, each on its own knob. Recording musicians will appreciate the iO Dock’s direct-monitor switch, which enables them to toggle between the incoming and playback signal on their headphones. Rounding out the iO Dock’s output section is a composite video connector, enabling users to employ the iO Dock as a source for video projection behind bands on stage, or for connection to most televisions and computer monitors.

RUGGED RELIABILITY
The iO Dock was built for the real world. Whether you're keeping it in the safety of the studio or taking it out for recording or performance use in the club or on tour, the iO Dock will not only deliver the connectivity you need for audio applications, but it also serves as a rugged, protective case for the iPad. The iO Dock completely houses the iPad on the bottom and three side surfaces. It also encases the iPad's screen in a protective bezel on three of its four edges, further shielding the mobile computing device from the potential for damage in punishing environments.

The applications of the iPad for music creation, production, and performance are limited only by your creativity. As an imaginative, cutting-edge music maker, the iO Dock empowers you to seamlessly connect the world of pro audio gear and instruments to the iPad and the massive collection of apps.

iPad™ and App Store™ are trademarks of Apple Inc., registered in the U.S. and other countries.

The only pro audio dock made for iPad and iPad 2
Connect microphones and instruments including guitar, studio monitors, PA speakers, headphones, and MIDI controllers
Universal device works with virtually every audio and MIDI app in the App Store; Core MIDI compliant
Perform, craft, create and play back music in virtually any conceivable manner or location
Video output for connection to TVs and projectors
Inputs: two combo XLR-1/4" for use with audio gear, instruments, and computer audio
Input channel gain controls and switchable phantom power for use with condenser microphones
Guitar-direct switch for use with amplifier- and effects-modeling app
Outputs: pair 1/4" and 1/4" headphone with separate volume controls
Control: MIDI In, MIDI Out, USB MIDI, and assignable 1/4-inch footswitch input

INCLUDES:

iO Dock docking station for iPad
Power supply
Quick start guide

AUDIO INPUTS

2 x XLR-1/4" Balanced TRS
Individual gain controls
Phantom power, switchable
Guitar (high-impedance) switch on Input 2

AUDIO OUTPUTS

2 x 1/4" Balanced TRS Main
1/4" TRS Headphone
Individual level controls

VIDEO OUTPUT

RCA Composite (requires compatible apps)

CONTROL I/O

MIDI In (DIN)
MIDI Out (DIN)
USB MIDI
1/4" Footswitch (function assigned by apps)

Native Instruments MASCHINE MIKRO [ Pre Order ] November/December 2011




Native Instruments MASCHINE MIKRO [ Pre Order ] November/December 2011

Native Instruments today announced MASCHINE MIKRO. Combining the full-featured MASCHINE software with a streamlined and compact controller, MASCHINE MIKRO makes the tactile and intuitive music creation approach of MASCHINE available at a significantly reduced physical footprint and price.

MASCHINE MIKRO is based on a highly portable controller that provides hands-on control of the central MASCHINE features at two-thirds of the size and weight of the full-sized hardware. Utilizing a single display and a dynamically assigned high-resolution master encoder to enable its compact footprint, the bus-powered MIKRO controller retains the distinctive full-sized 4×4 matrix of pressure-sensitive, dynamically backlit MASCHINE drum pads with their acclaimed response and feel.

MASCHINE MIKRO includes the full-featured MASCHINE software with its versatile pattern-based live and step sequencing, VST and AU plug-in hosting, real-time audio recording, sample editing and advanced multi- effects. The MIKRO version also contains the full 6 GB MASCHINE sound library, expandable with the series of MASCHINE EXPANSIONS, as well as the free KOMPLETE ELEMENTS sound collection.

Hardware Specifications:

Width: 320 mm / 12.6″
Height: 195 mm / 7.7″
Depth: 55 mm / 2.2″
Weight: 1.2 Kgs / 2.6 lbs
One high-contrast black and white display, 64 x 128 pixels
16 high-quality, illuminated pads with velocity and aftertouch
One master knob for controlling numerous functions
28 back-lit buttons
USB 2.0
Kensington Lock

With the new 1.7 software version, both MASCHINE and MASCHINE MIKRO now also benefit from advanced integration with KOMPLETE 8 and KOMPLETE 8 ULTIMATE, providing advanced sound browsing and parameter mapping for all instruments and effects contained in the bundle.

To further complement the growing MASCHINE product range, Native Instruments is also about to release iMASCHINE, an iOS app that brings intuitive groove creation to the iPhone and iPod touch platform. With four tracks, audio sampling, high-quality effects and an expandable arsenal of professional instruments and drum sounds from the regular MASCHINE library, iMASCHINE allows users to sketch grooves on the go, and later transfer them into the full MASCHINE software for detailed editing and arrangement. iMASCHINE is planned for release through the Apple App Store in October.

On the Mac, MASCHINE MIKRO requires OS X 10.5 or 10.6 (latest update, 32/64 Bit), an Intel Core Duo processor, 2 GB of available RAM, a USB 2.0 Port and 11 GB free disk space for complete installation. The MASCHINE software runs stand-alone, or as an AU, VST or RTAS (Pro Tools 8 and higher) plug-in.

Saturday, September 17, 2011

SERATO SCRATCH LIVE SL2/3/4 and VIRTUAL DJ SICWAX TIMECODED CONTROL VINYL V2.20 [ Limited Edition ]



SERATO SCRATCH LIVE SL2/3/4 and VIRTUAL DJ SICWAX TIMECODED CONTROL VINYL V2.20 [ Limited Edition ]

Colour : Neon Yellow / White / Glow In The Dark

Virtual DJ or Serato Final Scratch.

They are V2.20 compatible.

Grab it fast before its gone for super high bid item.

: )

Griffin LS Series Double Laptop/Mixer/DJ Controller Stand


Griffin LS Series Double Laptop/Mixer/DJ Controller Stand

Double Laptop Stand
Featured here is a double laptop stand by Griffin LS series. With an all-steel construction, this duel laptop stand is incredibly heavy duty, more than sturdy enough to hold anything from two laptops to other important gear. This double DJ laptop mount has two tiers. Both tiers originate from a single central pole from which those tiers fully adjust up and down from 2 inches and up to 15.5 inches measured from the base. In addition, both of these tiers, even when extended, fully swivel in a 360° (degrees) and even tilt up or down horizontally. Each tier supports two arm mounts. Each arm mount features a lip to further secure your gear. The width between the pair of arm mounts can adjust from 3 inches to 9 inches apart. All of the arm mounts can be adjusted and repositioned both inward and outward to hold your gear closer or farther away, depending on your preference. Tightening knobs throughout the entire double laptop stand allow the user to make all of these personalized changes. Furthermore, either one or both of the tiers can be easily removed, adding to this DJ double laptop stand’s versatility. So many options available!

This duel disc jockey laptop computer mount will hold practically all of your DJ gear including digital mixers, table-top CD players, laptops, & effects units. Going even further, when you have two items supported on the two double DJ laptop stand tiers, place a third item such as a digital mixer, turntable, or other DJ unit on the central bottom metal plate. Now you have three pieces of your equipment stored in one central location on your double disc jockey laptop computer stand, altogether adding convenience and saving space.

Protect your investments by using these double laptop stands. It is a heavy duty, deluxe double DJ laptop table top stand, ideal for holding your expensive equipment secure when you need it most. Small, padded cushions on the arms prevent metal on metal scratching.

We encourage you to compare this double laptop stand to others online. These duel DJ laptop holders are stable and durable. If you shop around, you will realize we offer the lowest price for double DJ laptop mounts. Try finding other double DJ laptop stands able to work this hard for you at such a cheap price; it cannot be done! We offer the lowest price for duel laptop stands. Buy today with peace of mind knowing you are getting the very lowest price possible for this quality double laptop stand.

Double Laptop Stand Features
Space saver
Double tiers
All steel construction
Tightening knobs
Small, padded cushions on mount arms to prevent metal on metal scratching
Adjustable/repositionable arm mounts allow inward and outward movement to bring your gear closer or further away as you prefer
Tiers can fully swivel 360° and also tilt up and down horizontally
Bottom flat metal platform may be used by placing a third unit under both tiers
Either arm can easily be removed
Heavy duty and deluxe edition to hold your expensive investments

Double Laptop Stand Specifications
Duel adjustable tier height: from 2 inches to 15.5 inches
Adjustable arm mount width: from 3 inches to 9 inches
Arm mount length: 11 ⅛ inches
Arm mount lip height: ¾ inch
Maximum weight load: 75 pounds
Platform: 9 ¾ inches by 15 inches
Gross weight: 9 pounds