MAIN details
• RGB Pads
• Loop and Effects Control
• XLR Output
• Booth Output
• USB Hub
• Serato included
DUO is the ultimate plug-and-play mixer for Serato DJ.
DUO has 8 RGB backlit pads on board for triggering 8 cue points per deck or the SP-6 sampler. The DUO built-in USB hub also provi- des 2 extra USB connections to allow integration to other USB devices such as MIDI controllers.
The integrated Mini-Innofader delivers super sharp scratch performance. Crossfader and line fader settings are easy to adjust on the DUO front panel.
The DUO Exclusive Sampler switch allows to recall Sampler Mode or Cue section Instantly.
The MIXARS DUO is a solid mixer with phono/line inputs, mic input, XLR Output, Booth Output, USB2.0 Hub, integrated 24-bi- t/48kHz audio soundcard, analog low/high-pass filter on each channel and many other controls.
Advanced users can custom map most mixer controls to many other third-party audio softwares.
www.mixars.com
DUO // TECHNICAL details
1. General sectiOn
power source ac 1 Power consumption Dimensions
Weight 4.15kg
00~240v 50/60hz
13watts
265mm (w) x 369mm (d) x 104.1mm (h)
2. inpUt/OUtpUt impeDance & sensitivity:
( 1khz input , mic/aux, trim, master at max.)
2-1. inpUt impeDance anD reference inpUt level:
Line 10k ohm /-14dbv(200mv)
Phono 47k ohm /-50dbv(3.16mv)
Aux 10k ohm /-14dbv(200mv)
Mic 5k ohm /-54dbv(1.99mv) (unbalance) Usb (n/a)/-3.4dbv(96k-782 tk.16/1khz -20db)
2-2. OUtpUt impeDance anD reference OUt level: nominal
Master 1k ohm /0dbv (1v) Balanced 600 ohm /0dbv (1v) Booth 600 ohm /0dbv (1v) Phones 33 ohm /-3dbv (708mv) Record 1k ohm /-9dbv (400mv)
3. freqUency respOnse:
(reference input level , mic/aux, trim, master at max.)
limited
±1db± 2db ±1db± 2db ±1db± 2db ±1db± 2db ±1db± 2db
limited
+2/-3db +2/-3db +2/-3db (riaa) +2/-3db
Line 20 - 20k hz Aux 20 - 20k hz Phono 20 - 20k hz Mic: 20 - 20k hz
4. maximUm inpUt:
nominal
+1/-1.5db +1/-1.5db +1/-2db +1/-2db
( mic/aux, trim, master at 9 o’clock. Adjust input 1khz level tooutput level less than 1% t.h.d with a-w/20khz lpf)
nominal limited
Line +15dbv Aux +15dbv Phono -21dbv Mic -25dbv
5. maximUm OUtpUt:
+14dbv +14dbv -22dbv -26dbv
( mic/aux, trim, master at max. Adjust input 1khz level to output level less than 1% t.h.d with a-w/20khz lpf )
Master unbalanced Master balanced Booth balanced Phones
nominal
+17 dbv +17 dbv +17 dbv +5dbv
limited
+16dbv +16dbv +16dbv +4dbv
www.mixars.com

DUO // TECHNICAL details
6. s/n ratiO:
( 1khz input , mic/aux, trim, master at 12 o’clock, with a-w/20khz lpf, input short when no signal )
Line 86db Phono 86db Aux 86db Mic 79db
7. thD + n:
83db
83db
83db
75db
at 0db input at -36db input at 0db input at -40db input
at 0db input at 0db input at -36db input at -40db input
nominal limited
( 1khz input , mic/aux, trim, master at 12 o’clock, with a-w/20khz lpf)
nominal
Line 0.01 % Aux 0.01 % Phono 0.02 % Mic 0.03 %
8. crOsstalk:
limited
0.02 % 0.02 % 0.05 % 0.06 %
( 1khz input , mic/aux, trim, master at 12 o’clock with a-w/ 20khz lpf, input short when no signal )
nominal limited
Line 85db Phono 85db
9. l&r channel separatiOn:
82db @each channel input at 0db input 82db @each channel input at -36db input
( 1khz input , mic/aux, trim, master at 12 o’clock with a-w/20khz lpf, input short when no signal )
nominal limited
Line 85db Phono 85db
10. eqUalizer respOnse:
82db @between l and r channel at 0db input 82db @between l and r channel at -36db input
( reference input level , mic/aux, trim master at max. With20khz lpf )
line:
(1) low band
Maximum level Minimum level (2) middle band Maximum level Minimum level (3) high band Maximum level Minimum level
nominal limited
(low band reference frequency is 70hz) +12 ± 1db ± 1.5db
-25 ± 1db ± 1.5db
(middle band reference frequency is 1khz) +12 ± 1db ± 1.5db
-25 ± 1db ± 1.5db
(hi band reference frequency is 13khz) +12 ± 1db ± 1.5db
-25 ± 1db ± 1.5db
11. aUDiO carD Usb
24 bit
No comments:
Post a Comment